
6
1. In standby mode, press and hold the
AL1
or
AL2
button,
the
or
icon will
light and the hour of the alarm time
will blink to prompt for input.
2.
Repeatedly
tap the VoL- or VoL+ button to adjust the hour. Press and hold
the button for fast advance / reverse setting.
3. Tap the
AL1
or
AL2
button to confirm the hour setting, the minute digits will
blink to prompt for input.
4.
Repeatedly
tap the VoL- or VoL+ button to adjust the minute. Press and hold
the button for fast advance / reverse setting.
5. Press the
AL1
or
AL2
button to confirm and finish setting the alarm time. The
alarm indicator
or
will appear to indicate it is enabled.
6. To disable the alarm, in Standby mode, double tap the
AL1
or
AL2
button,
the relative alarm indicator
or
will disappear from display.
7. Tap
AL1
or
AL2
button again will enable the alarm.
8. After the alarm sounds, press the any buttons to turn the alarm off.
Snooze Function
1. When the alarm sounds, it can be temporarily stopped by pressing the
SNOOZE/SLEEP button. The display will show the “SNOOZE” indicator and
the relative alarm indicator
or
will be flashing.
2. The alarm will be delayed for 9 minutes and then come again.
3.
This manual snooze operation can be repeated again and again.
1. In BT mode, press the
SNOOZE / SLEEP
button once, then the “SLEEP”
indicator will appear on the display.
2. Tap the
SNOOZE / SLEEP
button repeatedly to select the desired sleep time.
The sleep timer can be chosen from 15 - 60 minutes in 15 minute step. After
sleep timer selected, wait for 5 seconds to confirm. The “SLEEP” indicator
continues to appear on the Display. The unit will stop and go into Standby
mode automatically after selected sleep time has expired.
3. To check remained sleep time, simply press the
SNOOZE / SLEEP
button.
4. Press the
button to switch off the unit before the selected sleep time
expires.
NOTE:
If you touch the
SNOOZE / SLEEP
button once and the “SLEEP”
Alarm Setting
Sleep Timer Operation