HOLDERS INCLUDED
MHS6001
SPECIFICATIONS
SSB6000: Stereo Satellite Box
Inputs:
Microphone input, 2 channels with
MicroDot Connector. 1 pcs. 4-pin female
XLR, to link from another SSB6000.
Output:
1 pcs. 4-pin male XLR, to connect the
MSB6000 Master Sum Box or another
SSB6000.
Frequency Range:
100Hz -10kHz (-3dB) with Soft Boost Grid
100Hz -15kHz (-3dB) with High Boost Grid.
Hi-cut:
-6dB/oct. from 10kHz
Lo-cut:
-6dB/oct. from 100Hz
Max SPL input handling:
System unloaded: 134dB
System loaded: 128dB (10 pcs. 4061)
Attenuation:
4.5dB to ∞ dB, each channel
Microphone input impedance:
1.8k Ohm
Dimensions:
9.5 x 10.4 x 3.4cm (3.75 x 4.10 x 1.4in)
Weight
270g (9.5oz)
MSB6000: Master Sum Box
Input:
Single 4-pin female XLR, to connect from
the SSB6000
Outputs:
Dual 3-pin male XLR, 2 channel microphone
outputs
Power supply:
48V phantom, applied simultaneously to
the 2 microphone outputs.
Output impedance:
Lundahl® output transformer, < 600 Ohms
THD:
0.02% (100Hz – 10kHz)
Crosstalk:
-70dB at 1khz
Cable drive capability:
200 meters
Dimensions:
12 x 10.4 x 3.4cm (4.7 x 4.10 x 1.4in)
Weight:
400g (14.0oz)
4061 Miniature Microphone
Please see the User’s Manual for Miniature
Microphones, included with each 4061
microphone.
7
10 pcs. Miniature Holders for Strings for attach-
ment of a DPA Miniature Microphone on violin, viola,
cello or double bass.
(Reorder No. MHS6001)
The holders are to be mounted between the tailpiece
and the bridge and either over or under the strings
according to the desired sound colour or sound
level. Mounting above the strings will give the most
natural sound. Under the strings will give most level.
10 pcs. Universal Surface Mounts for attachment of
a Miniature Microphone on a wide variety of musical
instruments. These mounts can also be used to
direct and restrain any excessive mic cable, for
example on the bottom of a violin or guitar.
(Reorder No. DMM0007, 5 pcs.)
The soft rubber holder uses a special non-marking
adhesive backing, to mount the microphone at virtually
any location on the musical instrument. This adhesive,
while providing a firm location for microphone mount-
ing, retains its ability to adhere through multiple uses.
6
DMM0007
