Protection cap
DPA d:fine
TM
headset microphone comes with a red plastic cap which
serves to protect the microphone head when putting on make-up,
hairspray and more. Remove the cap before use.
Color codes & cable steer
DPA d:fine headset microphone comes with a number of cable steer
clips in different colours. Mounted on the cable relief, this clip allows for
quick recognition of a specific headset microphone.
Clothing clip
The supplied clothing clip allows
you to attach the cable to your
clothes, thus relieving the cable
draw to the headset mic.
This is essential on the
single-ear headset mic.
Maintenance
DPA d:fine headset microphone is resistant to high levels of humidity.
However, care must be taken to keep the headset microphone away from
exposure to water and cleaning fluids, and to keep the microphone head
dry at all times. Do not use spray or fluid containing chemicals that could
remove static electricity on or close to the microphone. This could cause
permanent damage.
Cable maintenance
Use organic oil (e.g. olive oil) or lukewarm distilled water to remove
residue from tape, glue, or make-up on the cable. Do not bend the cable
or rub it harshly, it may stress the inner cores of the cable and cause
them to break over time.
© Copyright 2012
Service & repair
If you are not satisfied with the characteristics exhibited by this product, please go to
www.dpamicrophones.com/service for instructions.
Warranty
The d:fine
tm
headset microphone is covered by a two-year limited warranty.
CE marking
This product conforms with all relevant directives approved by the European Commission.
Product features and specifications are subject to change without notice.
dB
10
0
-10
-20
-30
20 Hz
50
100
200
500
1 kHz
2
5
10
20
40
dB
10
0
-10
-20
-30
20 Hz
50
100
200
500
1 kHz
2
5
10
20
40
Black line is near field (2 – 3 cm/0.8 – 1.2 in).
Green line is far field (more than 30 cm/12 in).
Frequency response
d:fine
TM
omni headset microphone
Frequency response
d:fine
TM
directional headset microphone