The d:vice™ MMA-A can be used right out of the box but to take full advantage of it, please refer
to these instructions to get started using the d:vice™ App.
GAIN
Use the GAIN slider to adjust input levels. Slide
to the right to increase amplification, to the left
to decrease. Make sure to keep an eye on the
level meters when you are adjusting gain. The
meters should stay in the green and yellow areas.
FILTER
The FILTER button (low cut / high pass) cuts out
unwanted, low-end frequencies (rumble) that
can decrease the intelligibility of your recorded
audio. In most cases we suggest using the FILTER
button and if, for example, you are recording
outside near a road with traffic, this setting is
essential.
MONITOR
Use the MON button to send audio to your
headphones so you can hear what you are
recording. Please note that a headphone must
be connected to the iOS device, otherwise the
button will not activate and you’ll be prompted
to connect a headset. If the headset includes
a microphone it
must
be connected prior
to connecting the d:vice™ via the Lightning
connector. This is due to the iOS ‘last entry
active’ nature of operation. (We recommend
using a wireless headset when using an iPhone
7.)
LOCK
Use the LOCK button to block 3rd party apps
from controlling gain. Gain settings can be
controlled and saved on the d:vice™ for use
in your favorite recording / broadcasting apps.
The lock button also controls the setting of the
low cut / high pass filter. Saved locked settings
are automatically activated the next time you
connect to the d:vice™.
Содержание d:vice
Страница 1: ...User s Manual ...