Using the remote contol you can adjust the volume of the speakers, mute, power on/off and switch between the Main Audio Source and Local Audio
Source.
Each Infra-red enabled pair of speakers has the ability to pick up infra-red commands and route them back to the system via the Multi-Room Audio Dongle
in the Main Living Space so that a hi-fi system or TV can be controlled from any zone. This can also be used to control a digital TV receiver for example,
allowing you to change channel from another room. To do this Window Emitters (supplied with the Dongle) must be fitted to the Multi-Room Audio Dongle
and stuck onto the infra-red receiver window of each piece of equipment.
If your speakers are not responding
try changing the battery in remote
control.
Only one speaker of each pair has
an Infra-red window on it, it is
identified by the LED light.
All equipment (included leads and cable for installation) can be bought from
digitalplumbers.com
- its easy. Refer to our website for useful
FAQ sheets on the digitalplumbers wiring system and the services we can provide.
Turn zone on / Select the
Main Audio Source
Select the Local Audio Source
Adjust the volume
Mute the volume
Turn a zone off
Using the Remote Control
Using Infra-red Pass-through
Call....
0870
850 1337
Document number UG03-R1
®
Radio
CD Player
VO L
VO L
Blue
Green
Flash
Red
VO L
VO L
VOL
P to unmute
Press until indicator red
Press until indicator green
Press once
Press once
Window Emitters
Connect to the infra-red receiver window of
each piece of hi-fi equipment you wish to
control
Window Emitters
Connect to the infra-red receiver
window to the Multi-room Audio
Dongle
In-ceiling speaker
Aim the remote control of
the device you want to
control at the in-ceiling
speaker Infra-red speaker
window
