STEP 4A -
Front-Panel Pushbuttons
FRONT-PANEL PUSHBUTTONS
Front-panel buttons allow you to directly
control the KVM switching operation. Simply
press the button to toggle to the selected PC
port (together with hub port control and/or
audio/mic port, if binding is enabled).
By default, PC port switching, hub port control
and audio/ mic port switching are bound
together, unless you specify the audio to be
fixed to a specific port.
TABLE 2. FRONT-PANEL PUSHBUTTONS FUNCTIONS
COMMAND
PUSHBUTTON
DESCRIPTION
Select PC port
Press the corresponding button to
select the active PC port
Select the active PC port. (Jointly select PC port/
hub port control/audio mic, if binding is enabled.)
Select Hub
Port control
Press the button to toggle the specific
PC + USB hub port control. (It works
only if PC port/hub port control
binding is enabled.)
Select the PC port that controls all USB hub ports.
(Jointly select PC & hub port control, if PC/hub port
control binding is enabled.)
Define Hotkey
Preceding
Sequence
Press and hold down the last button
(Button 2/Button 4) until you hear two
beeps, release the button,
then press the (y) key.
Select the hotkey preceding sequence among
5 alternative keys.
