10 / 76
3 Transport/Storage/Disposal
3.1 Checking the condition upon delivery
1. On transfer of goods, check each packaging unit for damage.
2. In the event of in-transit damage, assess the exact damage, document it and notify DP
or the supplying dealer and the insurer about the damage in writing immediately.
3.2 Transport
– Transport the device in its original packaging.
– Observe the transport instructions on the original packaging.
– Keep the original packaging for future transport and storage.
3.3 Storage
If the ambient conditions for storage are met, the function of the control unit is safeguarded
even after a prolonged period of storage.
CAUTION
Damage during storage due to humidity, dirt or vermin
Corrosion/contamination of the control unit!
Ø
For outdoor storage cover the (packed or unpacked) control unit and
accessories with water-proof material.
Table 4:
Ambient conditions for storage
Ambient condition
Value
Relative humidity
Min. 5 % to max. 90 %
Ambient temperature
-10 °C to + 70 °C
– Store the control unit in dry, vibration-free conditions and, if possible, in its original
packaging.
– Store the control unit in a dry room where the level of atmospheric humidity is as
constant as possible.
– Prevent excessive fluctuations in atmospheric humidity. [
3.4 Disposal
Electrical or electronic equipment marked with the adjacent symbol must not be disposed of
in household waste at the end of its service life.
Contact your local waste disposal partner for returns.
If the used electrical or electronic equipment contains personal data, the operator is
responsible for deleting it before the equipment is returned.
