Doyon TLOIG, Руководство пользователя

Страница: 7 / 71

A5
INSTALLATION
IN GENERAL
See “Warnings” and “Distances to respect for the installation”.
Take off the packaging material with care. Take off all the material used for packing and accessories.
Bolt the oven to the floor using the 5 bolts included with the oven. Seal the unit on the floor with
silicone. Install the draft hood on the chimney. Verify every adjustments and correct it if
necessary. Install the hood covering the top front of the oven.
Each unit is set up to be used with the type of gas and electrical supply specified on the nameplate
fixed on the front of the oven.
The installation must be conform with the National fuel gas code ANSI Z223.1-XX and CAN/CGA-
B149-XX, Gas Installation Code and local Codes where applicable. Refer to last edition year for
XX.
The oven's combustion system consists of a very safe gas burner certified in accordance to the
American Gas Association Standard in USA and with the Canadian Gas Association in Canada.
1. To the certified gas technician
The burner installed on DOYON gas fired ovens is set up and adjusted at the plant for a first
class operation. It is nevertheless necessary to verify on site the pressure at the burner input.
The following table indicates the pressures that must be set up to remain conform to the AGA
standards or CGA.
TLOIG
GAS TYPE ALTITUDE
(FT)
INPUT
(BTUH)
REGULATOR
INPUT
PRESSURE
(Water column
inches)
BURNER
INPUT
PRESSURE
(Water column
inches)
BURNER
ORIFICE SIZE
(DMS)
Propane 0-2000 USA 200,000 11,0 7,5 # 15 drill
Propane 0-4500 CAN 200,000 11,0 7,5 # 15 drill
Natural 0-2000 USA 200,000 7,0 3,5 19/64
Natural 0-4500 CAN 200,000 7,0 3,5 19/64