AEF-A.DOC
11/2011
16
4.7.- HOW TO STOP THE SPIRAL MIXER
There are four different ways to switch off the spiral mixer:
•
Lift the safety guards.
•
Push the red stop button
.
•
Push the red emergency stop switch.
•
When in automatic mode, if the programmed time expires, the machine will stop
automatically.
4.8. ALARM MESSAGES
Display Message
Cause
OPEn
Manual mode (MM) or Automatic
mode(AM):
Safety guard opened.
Prog
Successful access in program mode
(AM).
SAVE
Successfully leaving and saving edited
program (AM).
Erro
Thermal relay protection activated.
Effort of the machine, with activate of
the thermal protection of engine, or
caused by the effort of hard dough; Or
by various frictions. Shut the machine
of the plug.
Reduce the load on the machine.
Try to work again.
DonE
Automatic program cycle has ended.
In case of “erro” message, switch off the general switch of the machine
for
approximately 10 minutes. The error can be eliminated if it was caused by a punctual cause,
but if not, call the after sales Service.
