background image

  Curaflex Nova

®

 

Uno/M/Z

Curaflex Nova

® 

Uno/M/T

1

9

5

2

10

6

4

12

8

3

11

7

A

B

C

Curaflex Nova

® 

Uno/M/T

Curaflex Nova

® 

Uno/M/Z

1

9

5

2

10

6

4

12

8

3

11

7

A

B

C

Curaflex Nova

® 

Uno/M/Z

INSTALLATION INSTRUCTIONS

Curaflex Nova

® 

Gasket inserts

299130-02/03.22

6: Re-tighten gasket insert again 
(e.g. after disassembly)

For the final assembly of the gasket insert, tighten the nuts 

(size 10).

Thereby, proceed alternating: crisscross every few turns in at 

least 3 intervals (A>B>C).

Proceed until the upper nuts twist off (ITL principle: Integrat-

ed Torque limiter; no special tools necessary.)

5: Final Assembly

Alternately remove already separated nuts crosswise in 

several intervals. Use new nuts (optionally available), and 

continue the installation as described under 4, or ... 

... Tightening of the still remaining nuts (size 11), alternately 

crisscross, each with 5 nm torque.

DOYMA products are continuously being further developed. Technical changes will be performed without prior notice.

25 year warranty on all DOYMA products.

 

More information at www.doyma.com

DOYMA GmbH & Co

SEALING SYSTEMS

FIRE PROTECTION SYSTEMS

Industriestr. 43-57

28876 Oyten

Phone:   0 42 07/91 66-300

Fax:  

0 42 07/91 66-199

www.doyma.com

[email protected]

Содержание Curaflex Nova Uno/M/Z

Страница 1: ...rings they are only used for elastic sealing of pipes cables Slight axial movements of the pipes and cables are permitted Furthermore fixing tabs are optionally available and can be screwed onto the frame ring fixing set accessory These tabs additionally secure the gasket insert when the pressure loads are higher Curaflex gasket inserts are maintenance free Once correctly installed it is not neces...

Страница 2: ...ools 1 extension 1 hexagon socket for size see installation steps Equipment Lubricant Cleaning agent solvent free Calliper gauge Cleaning cloth Sealing components for the media pipe cable cable protection pipemustbeinstalledinacoreboreinwaterproofconcreteorapre installed pipe sleeve the position of the gasket insert must be taken into account see installation step 4 Scope of delivery Curaflex Nova...

Страница 3: ...ket insert and place it and place it around the media line Close the quick release fastener Reinsert the pin Position the gasket insert in the sealing level of the wall In case of doubt in terms of where the sealing level is clarify the procedure with the planner or the wall manufacturer Position the gasket insert in the sealing level of the wall In case of doubt in terms of where the sealing leve...

Страница 4: ...st off ITL principle Integrat ed Torque limiter no special tools necessary 5 Final Assembly Alternately remove already separated nuts crosswise in several intervals Use new nuts optionally available and continue the installation as described under 4 or Tightening of the still remaining nuts size 11 alternately crisscross each with 5 nm torque DOYMA products are continuously being further developed...

Отзывы: