Dowdeswell Speed-Harra Скачать руководство пользователя страница 2

- 2 - 

Introduction to the manual 

 
 
The provision of this manual is a requirement of the 

Supply of Machinery (Safety) 

Regulations 1992. 

 
 
 
This manual has been written and provided to enable operators of Dowdeswell 
products to: 
 

1)

 

Understand how the machine operates. 

2)

 

Be able to operate the machine safely and without hazard to either the operator 
or those in the vicinity. 

3)

 

Be able to use the machine to its full potential. 

 
The operator or any persons employed to service or maintain the machine must read 
and fully understand this manual before using or servicing the machine. 
 
The contents of this manual are intended as a guide to the operation and servicing of 
the machine described herein and as such is not a training manual. 
 
Whilst ever care and attention has been taken in the design and production of al 
Dowdeswell products as with all machinery there remains a certain amount of risk to 
personnel whilst the machine is in use. 
 
 
 
 
In accordance with the 

Supply of Machinery (Safety) Regulations 1992

 
Note: The equivalent continuous A-weighted sound pressure level at the drivers seat 
does not exceed 70dB(A). 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Содержание Speed-Harra


















Отзывы: