D
OVRE
8
Subject to change because of technical improvements
.
Press it again and the flame and the charcoal bed
turn on, the LCD screen displays
.
The buzzer beeps once when the key is pressed.
Press
to adjust the red flame.
The buzzer beeps once when the key is pressed.
Press
to adjust the yellow flame.
The buzzer beeps once when the key is pressed.
Press
to adjust the blue flame.
The buzzer beeps once when the key is pressed.
Press
to turn on, turn off and adjust top light col-
ors. The buzzer beeps once when the key is pressed.
Press the heating key
.
Press for the first time, the heating elements work
at 1900W, the LCD screen displays
the indic-
ator
on the machine lights red.
Press a second time, the heating elements work at
950W, the LCD screen displays
, the indicator
on the machine lights blue.
Press a third time and the heating elements turn
off, the LCD screen does not display the function
icon, the indicator
on the machine goes off. The
buzzer beeps once when the key is pressed.
Note: in case the heating elements are turned
on by remote control, whether the heating ele-
ments work or not depends on the temperature
setting and ambient temperature. They work
only when the temperature setting is above the
ambient temperature.
Press keys
or
to adjust the temperature set-
ting between 7°C and 30°C .The buzzer beeps when
the key is pressed.
Press shift key
.
Press once, the corresponding figure flashes.
Press
now to set current time and week.
The buzzer does not beep when the key is
pressed.
Press timing parameter setting key
.
Press for the first time and the LCD screen dis-
plays
to indicate Monday. Now the tem-
perature setting flashes, press
to set the
timing temperature for Monday, press key
to
confirm and then press
the time setting for
timing. The displayed time parameter is “00-23.”
Press
to set the current operating state of tim-
ing function.
indicates that the timing is on currently and the
control temperature is the temperature setting
indicates that the timing is on currently and the
control temperature is the temperature setting
minus 3°C, No display indicates timing is off cur-
rent and the heating elements do not work. Cor-
responding point flashes when setting.