21/23
NT 1004-C00 09.09 SLC24 SLC36 e
10.1 DISCHARGE PORT
• Unscrew the 8 nuts
106
with the studs
105
and
107
.
• Turn the front cover
401
so as to position the outlet port
in the desired position.
• Make sure that the seal
205
is secured in its housing.
Secure it with a grease that is compatible with the
transferred product if necessary.
• Re-mount the 2 long studs-nuts
106-107
at the bottom
throught the lug and the 6 short studs-nuts
105-106
into the remaining holes and all tighten (8 x M16
assembly torque 75 Nm).
10.2 SUCTION PORT
• Dismantle the main body
101
including the suction port
as indicated in the corresponding §.
• Re-mount the main body
101
in the desired position by
fitting the indexing pin in the housing provided in the
bearing
596
.
• Make sure that the seal
113
is secured in its housing.
Secure it with a grease that is compatible with the
transferred product if necessary.
401
BE CAREFUL WITH THE WEIGHT OF THE
PARTS WHEN THEY ARE BEING
REMOVED.
WARNING
The weight ot the parts can
be dangerous and may
provoke bodily injuries or
material damages.
10. CHANGING THE ORIENTATION OF THE PORTS
