Clean towels or paper towels
Soap and hot water (Cleaning tank only)
Non-abrasive cleaning pads
Glass
cleaner
Case Cleaning Check List
1. Clean the top sill
Spray the top sill with a mild cleaning solution and wipe it down with a clean cloth or paper towel
Spray the top sill with sanitizer and allow it to air dry
2. Clean the rear doors and tracks (if applicable)
Remove the rear doors from the tracks
Use a mild glass cleaner and a clean paper towel or cloth and wipe down the doors
Spray the doors with sanitizer and allow them to air dry
Spray the door tracks with a mild cleaning solution and wipe them down with a clean cloth or
paper towel
A bottle brush may be used for cleaning the grooves in the door track
When cleaning the rear door tracks, be sure to clean the debris to the outside of the door
track where there is a “wipe-out” groove machined into the track.
Replace the rear doors into the tracks
3. Clean the Coolgenix display pans and interior components
Depending on the case design, the front glass will lift or swingout to access the Coolgenix pans
Make sure the surface of the pan is room temperature before cleaning
If you have not done so already, remove the pan sensor located on the bottom of the center pan
in the case
If the case is equipped with quick connects, disconnect the coolant hoses from the pans using
the quick connects on the hoses. Don’t worry – it is normal for a
few drops of the secondary fluid to escape when disconnecting the
pans. It is a food grade solution that will not harm you or the case.
Coolgenix shelving and step deck applications will have the quick connects for ease of removal
for cleaning
If the case is not equipped with quick disconnects, carefully lift the pans and lean against the
front of the case until the case tank is cleaned
Remove the pan spanner bars and rear pan support bars
Quick connect hoses. Push the gray button to
disconnect the hoses to remove the Coolgenix
deck pan.
