rim
backboard
C. Locate rim pad, peel off
adhesive and place on
backboard at rim location
D. Assemble rim with enclosed
hardware
E. Fasten rim cover under rim
F. Hang Net
G. Check leveling of pole. Pole
should be level in all
directions.
Note: If adjustment is
necessary, adjust system by
rotating the nuts. After system
is level, completely tighten nuts.
A. Lower system to the safety stop.
B. With three people, two people hold up
the backboard and the third person
inserts: 4, 3-1/2" bolts
12, 1/2" nylon washers
8, 1/2" steel flatwashers
4, 1/2" lock nuts
3-1/2" bolt
1/2" steel washer
1/2" nylon
1/2" nylon
1/2" steel washer
1/2" lock nut
1/2" nylon
Step 3: Backboard and Rim
Step 4: Height Adjustment Decal
4
Figure 9: Backboard and Rim
NOTE: All hardware for goal
is included in rim package.
Pro-434
3-1/2" bolt
1/2" steel washer
1/2" nylon
Turn handle
clockwise
to lower
black
protective
sleeve
mark
here
Figure 10:
Height Adjustment
Turn handle
counter
clockwise
to raise
height
labels
10’
7’
8’
9’
6’
A. Raise system to 6’ from rim. (Measuring
from top of rim to the ground.)
B. With a marker, draw a line right above the sleeve
on the inside metal part of the crank system facing
the pole so they won‘t peel off (See Figure 10).
Note: Placing the decals on the front or sides of the
crank may cause them to peel off.
C. Raise system to 7' from rim.
D. Make another mark at edge of sleeve.
E. Continue marking lines at 8’, 9’ and 10’
F. Place provided numerical decals on the galvanized
steel to align with the designated height
measurement marks. Note: For accuracy, the black
line on the decal under the numbers should match
up with the determined marker height.
G. Height should now be set. Adjust if needed.
Note: Regulation rim height is 10 feet.
