Douglas Dynamics 85689 Скачать руководство пользователя страница 5

Lit. No. 74171, Rev. 00 

September 15, 2020

SAFETY

SAFETY PRECAUTIONS

Improper installation and operation could cause 
personal injury and/or equipment and property 
damage. Read and understand labels and the 
Owner's Manual before installing, operating, or making 
adjustments.

 WARNING

•  Driver to keep bystanders a minimum of 

25 feet away from operating liquid system.

•  Before working with the liquid system, 

secure all loose-

fi

 tting clothing and 

unrestrained hair.

•  Before operating the liquid system, verify 

that all safety guards are in place.

•  Before servicing the liquid system, wait for 

conveyor and spinner to stop.

•  Do not climb into or ride on liquid system.

 WARNING

•  The drive shafts, conveyor, and spinner 

assemblies transmit great amounts of 
power and, accordingly, are hazardous 
when in operation. All maintenance, 
inspections, or operator adjustments must 
be made with all source power OFF.

•  Keep liquid system and surrounding area 

clear of personnel and property when 
operating.

•  When traveling, especially fully loaded, this 

machine may have a high center of gravity, 
and care should be exercised when turning 
or driving on banked surfaces.

• Unauthorized modi

fi

 cations to the liquid 

system and related components may impair 
the function and/or safety.

 CAUTION

•  Do not operate a liquid system in need of 

maintenance.

•  Before operating the liquid system, 

reassemble any parts or hardware removed 
for cleaning or adjusting.

•  Before operating the liquid system, remove 

materials such as cleaning rags, brushes, 
and hand tools from the liquid system.

•  While operating the liquid system, use 

auxiliary warning lights, except when 
prohibited by law.

•  Tighten all fasteners according to the 

torque chart. Refer to torque chart for the 
recommended torque values.

 CAUTION

Disconnect electric and/or hydraulic power 
and tag out if required before servicing or 
performing maintenance.

PERSONAL SAFETY

•  Remove the ignition key and put the vehicle in 

PARK or in gear to prevent others from starting 
the vehicle during installation or service.

•  Wear only snug-

fi

 tting clothing while working on 

your vehicle or liquid system.

•  Do not wear jewelry or a necktie, and secure long 

hair.

•  Wear safety goggles to protect your eyes from 

battery acid, gasoline, dirt, dust, and brine.

•  Avoid touching hot surfaces such as the engine, 

radiator, hoses, and exhaust pipes.

•  Always have a 

fi

 re extinguisher rated BC handy, 

for 

fl

 ammable liquids and electrical 

fi

 res.

 CAUTION

DO NOT leave unused material in hopper. 
Material can freeze or solidify, causing unit to 
not work properly. Empty and clean after each 
use.

 WARNING

Overloading could result in an accident or 
damage. Do not exceed GVWR or GAWR 
ratings as found on the driver-side door 
cornerpost of the vehicle. See Loading 
section of your spreader Owner's Manual to 
determine maximum volumes of spreading 
material.

Содержание 85689





























Отзывы: