Douglas Dynamics 29070-1 Скачать руководство пользователя страница 3

Lit. No. 41936, Rev. 00 

August 15, 2015

41000

SAFETY DEFINITIONS

NOTE: Indicates a situation or action that can lead 

to damage to your snowplow and vehicle or other 

property. Other useful information can also be 

described.

SAFETY PRECAUTIONS

Improper installation and operation could cause 

personal injury and/or equipment and property 

damage. Read and understand labels these Operating 

Instructions before performing isolation module tests.

 WARNING

Indicates a potentially hazardous situation 

that, if not avoided, could result in death or 

serious personal injury.

 CAUTION

Indicates a potentially hazardous situation 

that, if not avoided, may result in minor or 

moderate injury. It may also be used to alert 

against unsafe practices.

CONTENTS

SAFETY INFORMATION

 ............................................3

OVERVIEW

 .................................................................4

SETUP

 ........................................................................5

OPERATION

 ...............................................................6

TEST SEQUENCE 

 .....................................................7

CODES REFERENCE TABLE

....................................7

 WARNING

Lower the blade when the vehicle is parked. 

Temperature changes could change 

hydraulic pressure, causing the blade to 

drop unexpectedly or damaging hydraulic 

components. Failure to do this could result in 

serious personal injury.

 WARNING

The tester shall keep bystanders clear of the 

blade during this test. Do not stand between 

vehicle and blade or within 8 feet of a moving 

blade. A moving or falling blade could cause 

personal injury.

 WARNING

To prevent accidental movement of the blade, 

always push the ON/OFF button to switch the 

control OFF whenever the snowplow is not in 

use. The power indicator light will turn OFF.

Содержание 29070-1









Отзывы: