8. Modification
The Space Saver should not be modified in any way by a third party.
9. Safety Information
For health and safety reasons people assembling, disassembling, transporting, maintaining
and cleaning Space Savers should wear adequate Personal Protection Equipment such as,
but not limited to; gloves, hard hats and safety shoes.
Do not exceed the maximum working load engraved on the device.
Make sure the resulting forces on the supporting structure are approved by a skilled
person.
All loads imposed shall be considered, e.g. dynamic forces caused by the lifting
machinery.
Bolts and nuts shall be tightened by means of a spanner in such a manner they cannot
be released by manpower.
When loads are using electrical power, equip-potential bonding shall be put in place.
When used as lifting accessory, Space Savers shall be inspected by a skilled person as
often as required but with a minimum of 1x per year.
Inspect equipment before every use. Damaged Space Savers shall be taken out of
service.
A Space Saver has to be taken out of services immediately if, during use, repair or
maintenance serious damages are discovered.
Maintenance and repairs can be undertaken only by authorized personnel. In any doubt
contact the manufacturer.
Do not throw Space Savers.
The Working Load engraved on the Space Saver is solely for a straight pull between
fixing points.
T85850_Manual Ver 1.1
Page
8
of
13