Page 6 of 8
PRESET 10 ARCHITECTURAL
– OPERATION
INDICATORS
GREEN LED
ON = CURRENTLY SELECTED PRESET
FLASHING = TIME SETTING MODE SELECTED FOR THIS PRESET
YELLOW LED
ON = PRESET FADE IS IN PROGRESS
FLASHING = TIME SETTING MODE SELECTED
RED LED
ON = STATION LOCKED OUT / RECEIVING DMX512 FROM EXTERNAL CONSOLE
FLASHING = RECORD MODE ACTIVE
GREEN LED
YELLOW LED
RED LED
STATE
OFF
OFF
OFF
UNIT NOT POWERED
OFF
OFF
ON
RECEIVING DMX512
PRESET 10 IS LOCKED OUT FROM
TRANSMITTING
OFF
OFF
FLASHING
RECORD MODE ACTIVE
CURRENT LOOK WILL BE STORED TO THE NEXT
PRESSED PRESET
FLASHING
FLASHING
OFF
TIME SETTING MODE ACTIVE FOR SELECTED
PRESET
ON
OFF
OFF
PRESET 10 TRANSMITTING DMX512
NO DMX512 INPUT
ON
ON
OFF
PRESET 10 TRANSMITTING DMX512
CURRENTLY FADING FROM PREVIOUS PRESET
RECORDING PRESETS
In order to set the individual dimmer levels recorded to a preset, the Preset 10 must be connected to a
DMX512 source. When less than 512 dimmer levels are received, a level of 0% will be stored for all
channels above those received.
Note:
For predictable results, avoid recording when the DMX512 levels are changing.
Recording of presets must be done from the MAIN faceplate.
1.
Using the primary DMX512 console, set a “look” to be recorded.
2. Using a small blunt object (e.g. paper clip), depress the RECORD MODE recessed button located
next to the red LED. The red LED will begin to flash. If you decide after depressing the RECORD
MODE button that you do not wish to make an edit, depress the RECORD MODE button a second
time. The red LED will no longer flash and no changes will have been made.
3. Depress the PRESET SELECT button adjacent to the preset number you wish to record. The
adjacent green LED will illuminate as you depress the button (Example: press the upper most left
button to store preset 1).
