Page 6
Details of Monitor
Parameters
Operation
Turn on/off
The monitor will automatically turn on when you start to exercise, and you can also turn on it manually by
pressing those buttons.
The monitor will automatically turn off after a while when you stop exercise.
If there is no data showing, please check if the wire has connected, or change the batteries.
（
The battery
model is AAA .
）
Mode
Time(TIME) ---------------------This mode displays the time you have pedaled.
Speed(SPD) ----------------------This mode displays the speed of your exercise in real time.
Distance(DIST) ------------------This mode displays the distance you have pedaled.
Calories(CAL) -------------------This mode displays the calories you have burned during your exercise.
Odometer
(ODO)-----------------------
This mode displays the total distance you have pedaled since the exercise
bike was purchased or reset.
Pulse(PUL) ----------------------This mode displays your heart rate per minute.
Scan(SCAN) ---------------------This mode displays above 6 modes automatically in turns.
When“SCAN” is pointed in the above left corner of the screen, the data will switch automatically one by
one; And you also can scan each data by pressing the button.
Reset
If you long press the button over 3 seconds, all data will be reset except odometer.
If you re-install the battery, all data also will be reset.
Time(TIME)
00:00-99:59
0.0-99.9ML/H
0.0-999.9KCAL
0.00-99.99ML
Speed(SPD)
Distance(DST)
Calories(CAL)
0-9999ML
Odometer(ODO)
SCAN TIME
SPD DST CAL ODO PUL
Pulse(PUL) 40-240BPM
