www.doublesight.com
STEP
3
Installation
1. Attach VESA Bracket to each monitor
2. Join Monitor to the Stand.
3. Set Monitor View Angles
Safety Note - Please hold or secure stand while installing monitors
as stand may be unstable during assembly.
Screw VESA Bracket onto Monitors in line with back side holes
using the provided M4-10 bolts (4 bolts per bracket).
4. Cable Management
You can now adjust the monitors to your preferred viewing angle.
17”
19”
Tighten both bolts with the wrench
(4MM) after putting the head of the
bolts through the appropriate key
holes as shown( ).
100x100
75x75
Note – left monitor moves in forward angles only.
Safety Note – do not force monitors into position as this may
damage panels.
h
ttp
://w
ww.doublesig
ht
.c
om
When adjusting the height, please
loosen the handle, set the proper
hight and tighten the handle.
Use the provided cable ties and velcro strapping to organize video
and power cables.
