User Manual
18
(MG2)
(MG5)
Replace MRS magnetic board
(MG4)
(MT)
Replace big magnetic sensor
(MG6)
(MG7)
(MG9)
Replace magnetic board on the right
4. Detective error message display and solutions
If one of the following error messages is displayed on the LCD during the course of
counting/sorting, please handle them as per the following solutions after the machine is stopped.
Error message display
Causes and solutions
SLANT/PASSWIDTH
Banknote tilt
1. Press "RESET" to continue the counting
2. If it is often displayed, adjust the adjusting screw toward the
clockwise direction to increase clearance.
CHAINED
DOUBLE
TIME1
FOLLOW
Some banknotes are connected or overlapped
1. Put the banknotes on the banknote stacker back to the banknote
hopper to count again.
2. If it is often displayed, adjust adjusting screw toward the
counter-clockwise direction to decrease clearance.
HALF
Half piece or incomplete banknote.
1.Remove it and continue the counting
MG/MG1/MG2/MG3
Counterfeit suspicious banknote
1.Remove it and continue counting
2.Clean away the dust on magnetic sensor
3.Replace magnetic sensor
WIDTH/LENGTH
The banknotes are nonconforming in size
1. Remove them and continue the counting.
2. Adjust counting IR sensor.
DENO DF
Denomination different
1.Remove suspect notes and re-count.
JUDGE
