6
3
Detail A
Place Screw Driver Tip Between Clip and
Plastic Brush Body. Rotate to Separate Tab
from Brush.
Flag Connector
Brush Assembly
Brush Retainer Bracket
Brush Retainer
Bracket Screw
Congratulations!
You’ve just purchased the
Double K CHALLENGAIR LARGE ANIMAL DRYER BLOWER™
Forced Air Dryer, which produces warm, high velocity air under pressure, to make your animal
grooming tasks easier. Your new dryer is designed to provide long, reliable service.
Please read this manual carefully and completely before beginning operation of your dryer
and keep in a convenient and safe place for future reference.
A warranty card is included with your dryer and should be filled out completely and mailed to
Double K Industries
within 30 days of the purchase date of your dryer to validate your
warranty. Online registration si available at
www.DoubleKIndustries.com
Your
CHALLENGAIR
LARGE ANIMAL DRYER BLOWER
™
has a two-year warranty covering
the unit against defects in materials and workmanship. Regular maintenance items such as
brushes and filters are not included (see warranty card for complete warranty information). It
is also important to retain your sales receipt as proof of purchase should service ever be
needed.
Your
CHALLENGAIR
LARGE ANIMAL DRYER BLOWER
™
has two brush-type motors. It is
important that the brushes be changed when they become worn down to prevent damage to
your dryer motor (brushes are maintenance components and are not covered under the
warranty). We suggest checking the motor brushes after every 600 hours of dryer use. Please
see section on BRUSHES in this manual for instructions.
A NOTE ABOUT HEAT: Your
CHALLENGAIR
LARGE ANIMAL DRYER BLOWER
™
has no
heating element. The
CHALLENGAIR
LARGE ANIMAL DRYER BLOWER
™
produces heat by a
“flow-thru” motor system, meaning the air is pushed through the motors and is warmed by the
natural heat of the motors that occurs during operation. This means greater electrical savings
and efficiency for you. The dryer will reach its maximum air temperature after about 2-4
minutes of operation. (Note: The higher the room temperature, the warmer the air from the
dryer will be.)
ASSEMBLY
To attach hose to dryer: Your dryer hose has a black hose adapter that will screw onto the hose
in a counter-clockwise motion. The adapter with hose attached then fits onto the dryer with a
half-twist motion that locks the adapter onto the dryer.
First, place the adapter over the snout of the dryer with the Double K logo facing up, then turn
hose counter-clockwise until the adapter locks in place, the Double K logo should then be
sitting horizontally.
To remove hose from adapter: Turn the hose clockwise.
ATTACHMENTS: Your dryer is equipped with one hose and 4 twist-on nozzles. To attach
nozzles to hose, twist the nozzles counter-clockwise. Twist clockwise to remove.
OPERATION - Switches and Controls:
1.
2-Speed:
a.
Low Speed / Standard Heat
- Turn on the top motor switch.
b.
High Speed / High Heat
- Turn on both motor switches.
