www.TheEdgePro.com
6
INSTRUCTIONS FOR INSTALLATION OF
WHEELS INTO BASE.
Place base on ground or sturdy table
with open side facing up. (fig. 1)
Line up post on wheel assembly with
hole in base. (fig.2)
Locking Wheel Placement.
Leave at least one non-locking wheel
between the 2 locking wheels so that
they are not next to each other. (fig.4)
Placing a cloth between your hand
and the wheel assembly to protect
hand from sharp edges, press firmly
in a downward direction, using your
body weight to push wheel
post into base (fig.3)
fig. 1
fig. 2
fig. 3
fig. 4
CONGRATULATIONS!
You’ve just purchased the
Double K CHALLENGAIR
9000 ΙΙ
, which produces large
volumes of warm air under pressure to make all of your animal drying tasks easier.
Your new dryer is designed to provide long, reliable service.
Please read this manual carefully and completely before beginning operation of
your dryer and keep in a convenient and safe place for future reference.
A warranty card is included with your dryer and should be filled out completely
and mailed to
Double K Industries
within 30 days of the purchase date of
your dryer to validate your warranty. Online registration available at
www.DoubleKIndustries.com
.
Your
CHALLENGAIR
9000 ΙΙ
has a two year warranty covering the unit against
defects in materials and workmanship. Regular maintenance items such filters are
not included (see warranty card for complete warranty information). It is also impor-
tant to retain your sales receipt as proof of purchase should service ever be needed.
Limitations
- Warranty does not cover shipping or transportation costs. Warranty
applies to original purchaser only. Proof of date of purchase is required. Warranty is
void if registration card is not mailed within 30 days of purchase or delivery.
Warranty does not cover abuse, accidents, acts of war, dropped product, improper
voltage, disassembly or alteration. Disassembly, repair or service by anyone other
than
Double K Industries
or a Double K Industries authorized service center will
void the warranty.
Operation:
Switches and Controls:
Your dryer has three rocker switches.
•
To turn the dryer on: Flip the left switch to the “ON” position.
•
To turn the dryer off: Flip the left switch to the “OFF” position.
Heat Control:
•
Low Heat
: Flip the top right switch to the “LOW” position while the bottom
right switch is in the off position.
•
Medium Heat
: Flip the bottom right switch to the “MED” position while the top
right switch is in the off position.
•
High Heat
: Flip both switches to “LOW” and “MED” position.
•
To Turn Off Heat
: Flip both switches to the “OFF” position.
Air Control:
The air volume on your dryer is controlled by the baffle wheel located
under the filter on the top of the dryer. Rotate the lever attached to the wheel clock-
wise to reduce the air and counterclockwise to increase the air volume (see ref #9).
NOTE:
The heat will also change as you increase or decrease the air volume, so you
may want to adjust the heat setting together with the air volume to achieve the
desired combination of air temperature and volume.
3
LOW HEAT
MEDIUM HEAT
HIGH HEAT
OFF
*NOTE: White indicates depressed
side of rocker switch