-1-
USER MANUAL
1
Main parameters
Item No.: E355-003
Material: plastic and electronic components
Batteries: Car battery: 1 pc of 3.7V rechargeable battery.
Remote controller battery: two pcs of 1,5V AA batteries.
2
Battery Installation
1. Open the cover of battery case locates in the back of controller, inserts two pcs of 1.5V AA
batteries into the battery case, and then screw the cover (Fig 2A).
2. Please screw out the cover at the back of car by screwdriver, open the cover as the arrow
showed, insert 1 pc of 3. 7V rechargeable battery, then screw the cover (Fig2B).
Notice:
This product shall be charged for two to three hours. The supporting USB charger shall not
be used for other devices other than this product.
3
2.4GHz Auto-matching
1. After installing the batteries of tractor and remote controller, turn on the switch of both. The
indicator of remote controller and the front lights of tractor would be flashing slowly, and then at a
state of auto-matching. When the tractor with a sound of DI-DI, it means the auto-matching is
successful.
2. One remote controller can only match with one tractor. After the success of matching, there is
non-interference of each tractor.
3. If the remote controller could not find out the 2.4G signal of the tractor in 1 minute, it would turn
in a sleeping state (light off of the indicator). To press any key to activate.
4. To remake a pair with other tractor or remote controllers, please turn off the power of both.
4
Basic operation and functions
Installation Diagram
