SAFETY WARNINGS
2. Follow Instructions
Follow all operating and use instructions.
3. Retain Instructions
Keep the safety and operating instructions for future reference.
4. Heed Warnings
Follow all warnings on the product and in the operating instructions.
5. Cleaning
Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
6. Water and Moisture
Do not use this product near water-for example, near a bath tub, wash
bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming
pool.
7. Accessories
Do not place this product on an unstable cart, stand, tripod,
bracket, or table. The product may fall, causing serious injury to
a child or adult, and serious damage to the product. Use only
with a cart, stand, tripod, bracket, or table recommended by the
manufacturer or sold with the product. Any mounting of the
product should follow the manufacturer’s instructions, and should
use a mounting accessory recommended by the manufacturer.
8. Transporting Product
Move product and cart combinations
with care. Quick stops, excessive
force, and uneven surfaces may
cause the product and cart
combination to overturn.
9. Attachments
Do not use attachments not recommended by the product manufacturer
as they may cause hazards.
10. Ventilation
Slots and openings in the cabinet must not be blocked or covered. They
are provided for ventilation, to ensure reliable operation, and to protect
from overheating. Never block the openings by placing the product on a
bed, sofa, rug or other similar surface. This product should not be placed
in a built-in installation such as bookcase or rack unless proper ventilation
is provided or the manufacturer’s instructions have been adhered to.
11. Power Source
Operate this product only from the type of power source indicated on the
marking label. If you are not sure of the type of power supply to your
home, consult your product dealer or local power company. For products
intended to operate from battery power or other sources, refer to the
operating instructions.
4
21
enabled and when Camport connector plug is detected the display will change to
the Camport source. Range is 0-1.
59 ACK MASK: Not used.
60 POLL RATE: Select Poll rate for MPI communications. Range is 20-169.
61 TIMING PULSE: Select timing pulse for MPI communications. Range is 186-227.
62 DIS. SETUP M: Disable/Enable displaying Setup Menu . Range 0-1.
63 DIS. AUDIO M: Disable/Enable displaying Audio Menu. Range 0-1.
64 DIS. VIDEO M: Disable/Enable displaying Video Menu. Range 0-1.
65 DIS. PARENTAL M: Disable/Enable displaying Parental. M. Range 0-1.
66 CH -TIME: Disable/Enable displaying CH TIME. Range 0-1.
67 EN. SET. COL: Disable/Enable custom colors for Setup Menu. Range 0-1
68 EN. AUD. COL: Disable/Enable custom colors for Audio Menu. Range 0-1.
69 EN. VID. COL: Disable/Enable custom colors for Video Menu. Range 0-1.
70 EN. PTL. COL: Disable/Enable custom colors for Parental Menu. Range 0-1.
71 EN. CH-T COL: Disable/Enable custom colors for CH TIME. Range 0-1.
72 FOR. SETUP M.: Select between (0 to 7) to set foreground color for Setup Menu.
Menu colors: 0-Black, 1- Red, 2- Green, 3- Yellow, 4- Blue, 5- Magenta, 6- Cyan, 7 White
73 FOR. AUDIO M.: Select between (0 to 7) to set foreground color for Audio Menu.
74 FOR. VIDEO M.: Select between (0 to 7) to set foreground color for Video Menu.
75 FOR PTL M.: Select between (0 to 7) to set foreground color for Parental Menu.
76 FOR CH-TIME: Select between (0 to 7) to set foreground color for Ch-Time.
77 BCK. SETUP M.: Select between (0 to 7) to set background color for Setup Menu.
78 BCK. AUDIO M.: Select between (0 to 7) to set background color for Audio Menu.
79 BCK. VIDEO M.: Select between (0 to 7) to set background color for Video Menu.
80 BCK. PTL M.: Select between (0 to 7) to set background color for Parental Menu.
81 BCK. CH-TIME: Select between (0 to 7) to set background color for Ch-Time.
Underlined commands are used most often.