Dot Hill AssuredSAN 4004 Series, Руководство по установке и замене FRU

Страница: 17 / 59

AssuredSAN 4004 Series FRU Installation and Replacement Guide 17
NOTE: Numbered items from Table 6 are shown in Figure 6 . Tinted items from Table 6 are shown in
Figure 7 on page 18.
Figure 6 Exploded view — controller or expansion enclosure (2U12)
Figure 6 through Figure 10 illustrate 12-drive enclosure models. Figure 8 on page 18 provides an assembly
of the exploded view shown in Figure 6 , and Figure 9 on page 18 shows an assembly of component FRUs
within the enclosure. Although not shown in Figure 6 , newer product models use an enclosure bezel
instead of ear caps (no longer used). The enclosure bezel is shown in Figure 10 on page 19 (removed) and
Figure 8 on page 18 (installed), respectively.
NOTE: The following illustrations further describe components for the 12-drive chassis:
• Controller module pictorial — Figure 7 on page 18
• Assembly — Figure 8 on page 18 and Figure 10 on page 19
• Internal components sub-assembly — Figure 9 on page 18
1
3
4
5
6
7
2a
2b