Dot Hill Systems AssuredSAN 6004 Скачать руководство пользователя страница 51

Страница: 51 / 363

delete task

Description

Deletes a task. If the task is scheduled, a confirmation prompt will ask whether you want to delete the

task and its schedules. Reply

yes

to delete both, or

to cancel the command.

Min. role

manage

Syntax

delete task

[prompt yes|no]

task

Parameters

prompt yes|no

Optional. For scripting, this specifies whether to automatically reply yes or no to confirmation

prompts. If this parameter is omitted, you must manually reply to confirmation prompts.

task

The name of the task to delete.

Example

Delete unscheduled task

Task1

# delete task Task1

Delete scheduled task

Task2

# delete task Task2

Task Task2 has 2 schedules associated with it that will also be deleted.

Do you want to continue? (y/n)

Содержание AssuredSAN 6004












































































































































































































































































































































































Результаты поиска

Содержание AssuredSAN 6004

Отзывы:

Dot Hill Systems AssuredSAN 6004, Справочное руководство CLI, Страница: 51 / 363

Результаты поиска

Содержание AssuredSAN 6004

Отзывы: