manualshive.com logo in svg

Dot Hill Systems AssuredSAN 6004, Справочное руководство CLI, Страница: 184 / 363

Поделиться
Скачать
Dot Hill Systems AssuredSAN 6004 Скачать руководство пользователя страница 184

184 Alphabetical list of commands

show schedules

Description

Shows information about all task schedules.

Syntax

show schedules

[

schedule-name

]

schedule-name

Optional. Shows information about the specified schedule only. A name that includes a space must 

be enclosed in double quotes. If this parameter is omitted, information is shown for all schedules.

Output

Schedule Name

The schedule name.

Schedule Specification

The schedule settings for running the associated task.

Status

•

Uninitialized

: The task is not yet ready to run.

•

Ready

: The task is ready to run at the next scheduled time.

•

Suspended

: The task had an error and is holding in its current state.

•

Expired

: The task exceeded a constraint and will not run again.

•

Invalid

: The task is invalid.

•

Deleted

: The task has been deleted.

Next Time

The date and time, in the format 

year-month-day hour

:

minutes

:

seconds

 (UTC), when the 

schedule will next run.

Task To Run

The name of the task that the schedule runs.

Error Message

•

If an error occurred while processing the task, the error message.

•

Blank if no error occurred.

Task-specific information, as shown by the 

show tasks

 command.

Example

Show information about all task schedules.

# show schedules

Show information about schedule 

Sched2

.

# show schedules Sched2

Basetypes •

schedules

•

status

See also •

create schedule

•

delete schedule

•

set schedule

•

show tasks

Содержание AssuredSAN 6004












































































































































































































































































































































































Отзывы:

Нет отзывов