Dot Hill Systems AssuredSAN 6004 Скачать руководство пользователя страница 145

Страница: 145 / 363

show disks 145

show disks

Description

Shows information about all disks or disk slots in the storage system. If no parameter is specified, the

command shows information for all installed disks.

NOTE:

In console format, to aid reading, disks are sorted to display in order by enclosure and disk

number. In API formats, output is not sorted because it is expected to be manipulated by a host

application.

Min. role

monitor

Syntax

To show information about disks:

show disks

[vdisk

vdisk

]|[

disks

]

[detail]|[perf]|[temp]

To show information about all disk slots:

show disks encl

Parameters

detail

Optional. This parameter shows additional detail about the disk.

encl

Optional. Shows information about each disk slot, whether it contains a disk or not. If you specify

this parameter with other parameters, they will be ignored.

perf

Optional. For all or specified disks, this parameter shows performance statistics from the latest

historical sample for each disk. Statistics shown include total I/Os (reads and writes), total amount of

data transferred, and average I/O response time.

temp

Optional. Shows the temperature for all installed disks.

vdisk

vdisk

Optional. Shows information about disks in the specified vdisk. A name that includes a space must

be enclosed in double quotes.

disks

Optional. Either:

•

A comma-separated list of the IDs or serial numbers of disks about which to show information.

For disk syntax, see

"Command syntax" (page 18)

•

all

: Shows information about all installed disks.

•

free

: Shows information about all disks that are available.

Output

Properties are described in alphabetical order.

Action

Shown by default or by the

perf

parameter. If Health is not

, this field shows recommended

actions to take to resolve the health issue.

Current Job

Shown by the

detail

parameter. See

Jobs

, below.

Data Transferred

Shown by the

perf

parameter. The total number of bytes transferred.

Содержание AssuredSAN 6004












































































































































































































































































































































































Результаты поиска

Содержание AssuredSAN 6004

Отзывы:

Dot Hill Systems AssuredSAN 6004, Справочное руководство CLI, Страница: 145 / 363

Результаты поиска

Содержание AssuredSAN 6004

Отзывы: