1. Handling
1.1 General advice
-
For cleaning the instrument please do not use abrasive cleaner, but a dry or
damp cloth.
-
Please store the measuring instrument in a dry and clean place when not in
use.
-
Avoid any force like shocks or pressure to the instrument.
-
Do not use force to connect the probe or interface plugs in. The interface
plug is different from the probe plug.
-
If
no sensor is connected to the instrument while switching on „OPN“ shows
on the display (Please refer to chapter error codes/troubleshooting).
-
A retractable stand on the back of the instrument allows it to be used as a
bench top instrument.
1.2 Operation
Before switching on the instrument, connect the probe/s to the instrument and insert
the battery (Please refer to chapter 6. Power supply / battery changing). A number
on the instrument’s housing marks each port.
1.3 Switching on and off
By operating the ON/OFF-key the instrument switched on or
off. After switching on the instrument indicates a full segment
test for 1,5 sec. afterwards the instrument starts operating in
measurement mode indicating the actual measurement
temperature.
