11
3. Press the skip up
or skip down
button to select the desired mode
(USB or SD) for encoding, then press the record REC button again to confirm.
(You can skip this step if only a USB drive or an SD/MMC card is inserted.)
4. The system will start the encoding mode after a few seconds. Insert your cassette into
the playback slot. During encoding, the USB or SD icon will be flashing on the display.
5.
To finish encoding, press the stop button. The display will show
“END” and return to CD/USB/SD mode.
NOTE
:
The recording speed is 1:1. Recording will take as long as playing the record.
The recording format is preset at MP3 bit rate 128 kbps.
The USB Port and SD Card Slot
Playback of music in MP3/WMA format via USB device or memory card
The system is able to decode and playback all MP3/WMA files stored in the memory
media connected to the USB port or SD/MMC card slot.
1.
Turn the volume knob clockwise to turn the equipment on.
2.
Following the illustration below, insert a USB device face up into the USB port, making
sure it is fully inserted. Alternatively, insert a memory card in the direction of the arrow
(as shown on the label next to the memory card slot), making sure to insert it straight
without bending.
IMPORTANT:
Connecting the USB device upside down or backwards could damage
the audio system or storage media (USB drive, SD or MMC card). Check
to ensure the direction is correct before connection.
3. Set the function selector to USB/SD mode. (If you have both a USB device and a
memory card inserted, press the MODE button to toggle between USB and SD mode.) The
system will start reading the storage medium automatically after mode selection and will
