WARRANTY:
The Dosmatic Warranty
We believe that we make the best and most reliable water-driven injectors available. Therefore, our war-
ranty reflects our confidence; we will back our units with the best guarantee available.
1. Dosmatic will provide for replacement of all parts proven to be defective in material or workmanship
from the date of purchase for the following time periods:
In the United States and Canada
All Other
3 years – The cover and body
1 year – Cover, body, motor piston, lower end*
2 years – The motor piston
1 year – The lower end*
*NOTE: (Your only responsibility is ordinary maintenance – filtering incoming water and solution and
replacing the o-ring and dosage piston when worn)
2. Return the unit to the distributor or to Dosmatic’s manufacturing facility, freight prepaid. Upon inspec
-
tion, if found to be defective in material or workmanship, the unit will be repaired or replaced, at Dosmat-
ic’s option, free of charge, and will be returned freight prepaid.
3. This warranty is invalid if the defects are found to be due to the product’s misuse, lack of maintenance,
defective installation, freezing, water hammer, misuse or abuse or unwanted side effects due to the chemi-
cals you choose to inject. The dosage piston, seals and o-rings are not covered under warranty nor is dam-
age caused by water impurities, including but not limited to, sand or iron. A filter no coarser than 140
mesh or 104 micron must be used in front of the unit for the warranty to be valid. Dosmatic will not be
responsible if the unit is used under conditions outside of its operating tolerances listed in this manual.
4. Dosmatic shall not be liable for incidental or consequential damage, such as any economic loss, result-
ing from breach of this written warranty or any implied warranty.
5. To return a unit for repair:
1. Thoroughly rinse all chemical solution from the lower end of the unit.
2. Drain the water from the upper end of the injector, leaving a small amount so that the seals do not dry
out.
3. If possible, identify the chemical solution injected and include a copy of the chemical manufacturer’s
Material Safety Data Sheet for each chemical injected.
4. All claims for warranty repair must include a copy of the original invoice listing the serial number of the
injector to be repaired.
5. With each injector returned, please fill out the return form in this manual.
6. If returning to Dosmatic, ship to:
Dosmatic U.S.A.
1230 Crowley Circle
Carrollton, TX 75006
7.
For the name of your nearest Service Center, call us toll free at (800) 344-6767 or at
(972) 245-9765.
6. There are no warranties which extend beyond those described above.
20
