DOSER Messtechnik GmbH & Co.KG
Kemptener Str. 73
87629 Füssen
Germany
T: +49 8362 9159 402
F: +49 8362 9159 407
[email protected] - www.doser.de
page 6
Moisture meter type DS5-AL
Optional extras:
- test module type
PE50R
for testing and calibrating
- PC-Software DMI-Controller to adjust parameter settings and to transfer
measured values for analysys and documentation
- special calibration of the moisture meter
Our operating instructions are intended for guidance and to provide information on our products and their uses.
They should not be taken to imply special characteristics or suitability for any specific purpose, other than those
stated.
We constantly work to improve our products and reserve the right to alter our products and operating instructions
without advanced notification.
Battery:
The meter works with a commercial 9V block battery. The capacity is
continuously controlled. If the battery is running low,
the display shows “BAT”
Change battery:
- open the battery box for example with a small screw driver
- take out the battery
- insert new battery, observing the correct polarity
- close the battery box
Attention!
In accordance with battery legislation, all used batteries
must be disposed off in special battery collecting bins.
The disposal of old or used batteries as part of normal
waste is not allowed!
Ser. Nr.
009871
made in germany
DS3
DS3
6.4%
6.4%
MODE
MODE
OK
ON
OFF
M=
material: 1
BAT
