INSTRUCTIONS
Indicate whether the Water Meter is 1PPG (1 gallon
per contact) or 10PPG (10 gallons per contact).
The lead wire next to the power cable connects to
the Water Meter.
The lead wire in front of the power cable connects
to either the house controller or Pump #1. The next
wire connects to pump #2.
ePC Quick Start Guide
ulse
P
1
2
3
CAUTION
- See operating manual for complete instructions
and safety standards.
- When connecting a metering pump either to a
public water supply or to its own water source,
you must respect the regulations in force
concerning protection of the source i.e. backflow
prevention, etc.
Included in the box
• ePulse Control
• Bracket Mounting Kit
• Operating instructions and maintenance manual
NOTE: Remove safety labels before
installing and remember that pumps may
hold water inside.
!
ontrol
C
ePulse Control Water Meter Splitter
To house
control
pump #1
pump #2
pump #3
(Continue to back)
