16H Manual Page 11
Revised: 11/2015
2. Machine Installation and
Setup
Section Five
2 . 4 FITTING PROJECTION LENSES
All lenses are supplied with quick change bayonet type mounts. To
mount the lens, install lens in lens barrel and rotate lens clockwise
until it clicks into place.
To install the lens: insert the lens with the
red dots aligned, rotate the lens clockwise
approximately 15 degrees to lock the
lens in place
2 . 5 Fitting work holding accessories
Work holding
accessories available for the 16H include combination
centers and vees, vertical glass plate work holder for the projection of
small flat components, rotary vice, and a wide selection of other items.
All of the accessories mount in the universal dove tail slot in the table
and are angular clamped in place with clamping screws. This type of
clamping accessory can be placed directly onto the table without
having to slide locking nuts in from the end of the table.
Dorsey Metrology International is also able to offer advice and
manufacturing facilities for special custom work-holding fixtures and or
custom options. Please Contact us with your requirements.
Locking
points