Dorsch Mikrosystem VME-PROF-S, Техническое руководство

Страница: 4 / 51

VME-PROF-S Technical Manual
DMS Dorsch Mikrosystem GmbH - 24972 Steinbergkirche Tel. (+49)4632/1411
942.1316.54 3
Preface
The user requires comprehensive information in order to make full use of the technical
abilities of this product. This manual is intended for hardware developers, project
engineers, and programmers who plan on using this VMEbus device.
The present publication has been designed to provide you with a complete range of
structured information. The following pages contain information which should make it easier
for you to use this manual. You will be provided with information on how this manual is
structured.
Despite all efforts from our side some problems may not be covered by this manual. This is
mainly due to the broad range of possible VMEbus applications. Please do not hesitate to
contact DMS if you experience any problems that are not covered by the ‘Troubleshooting’
section.
Contents
•
Hardware and Technical Data (Chapter 1)
This chapter contains a description of the device itself, how it fits into our range of
VMEbus products, and its principles of operation.
•
How to Setup the Unit (Chapter 2)
This chapter summarizes all data necessary for setting up the device. Special care
has been taken to make clear that hardware and software influence each other.
•
Primary Functions and Operating Principles (Chapter 3)
Chapter 3 contains a full description of built-in functions, i.e. information on wiring
the device and how to program it.
•
Address Information (Chapter 4)
This chapter details all address ranges and register addresses.
•
Software (Chapter 5)
This chapter contains a description on hardware-dependent software such as
drivers and descriptors.
•
Service and Maintenance (Chapter 6)
The information contained in this chapter includes details on maintenance and
service issues as well as a troubleshooting section where common problems are
discussed that may occur during operation of the card.
•
Appendix (Chapter 7)
This chapter contains wiring diagrams, dimension drawings, etc.
The last pages of this manual contain a number of forms (e.g. 'Reader Comments' or 'DMS
Return Form'). Please fill in those forms if you would like to propose any changes,
corrections or supplements. We suggest that you mail the sheet back to us. Your
suggestions will help us to improve the quality of future editions of this manual.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com