15. Insert needle spring (2) and plunger
spring (3).
16. Hand-tighten end cap (4).
8
Maintenance
8.1
Safety notes
WARNING!
Unsuitable replacement parts in explo-
sive areas
Replacement parts not compliant with the
specifications of the ATEX guidelines can
cause explosions in an explosive atmos-
phere. Serious injury and death could be
the consequence.
– Use exclusively original replacement
parts.
WARNING!
Danger from harmful or irritant sub-
stances
Serious injuries or death can result if you
come into contact with dangerous fluids or
steam.
– Spray gun Check regularly for leakage.
Observe local regulations and mainte-
nance schedule.
– Ensure that the forced ventilation is
operational.
– Follow the safety data sheet.
– Wear specified protective clothing.
– Avoid contact (e.g. with eyes, skin).
WARNING!
Risk of injury due to escaping material
and compressed air
Escaping compressed material can cause
serious injury.
Before carrying out any work:
– Disconnect the system, in which the
spray gun is installed, from com-
pressed air and material supply.
– Secure the system against being
switched on again.
– Depressurize the lines.
CAUTION!
Risk of injury due to spring tension
The end cap of the spray gun is under
spring tension. If you remove the end cap,
the spring tension could cause the end
cap to jump out unexpectedly and cause
light injuries.
– Removing and installing end cap
Maintenance
02/2020
EcoGun AS AUTO pro HD - MSG00009EN
17/44
