DÖRR EcoGun AL MAN 300, Руководство по эксплуатации

Страница: 18 / 44

NOTICE!
Painting defects due to lubricant containing silicone
If residues containing silicone reach into the material channels of the spray gun, it can result
in imperfect painting results.
– Only use silicone-free oil or grease.
Interval Maintenance work
After each use Purge spray gun Ä 6.5 “Rinsing”.
Before every change of material
Clean the nozzle Ä 7.2 “Cleaning”.
Clean the filter. Ä 7.2 “Cleaning”
Weekly and after every separation of
the system
Check grounding of connections and lines.
After every removal/ after every
cleaning
Lubricate trigger pin Ä 7.3.3 “Lubricate trigger pin.”.
Lubricate needle Ä 7.3.2 “Lubricate needle.”.
7.3.2 Lubricate needle.
Personnel:
Operator
+ additional qualification explosion pro-
tection
+ Additional qualification high pressure
Protective equipment:
Safety boots
Fig. 11: Lubricate needle.
1. Wet needle (1) with a drop of silicone-free
lubricant.
Cleaning and maintenance
05/2018 EcoGun AL MAN 300 - MSG00016EN 18/44