1
Product overview
1.1
Overview
Fig. 1: Overview
1
Nozzle
2
Air cap
3
Cap nut with spray jet screening
4
Filter
5
Flat jet control (Fl)
6
Circular jet control (Rd)
7
Withdrawal force control
8
Plug
9
Retainer lever
10 Trigger
11 Air connection, rotatable
12 Material connection, ball bearing
mounted
1.2
Short description
The spray gun is for coating surfaces with or
without compressed air. The atomized
coating material is fed through high pressure
lines.
The following factors influence the spray jet
and on the spray pattern:
Alignment of the air cap
Spraying air pressure
The higher the spraying air pressure, the
finer is the atomization and the softer are
the spray pattern edges.
Material pressure
The higher the material pressure, the
higher the material flow and thus the finer
the atomization.
The lower the material pressure, the
higher is the efficiency and the smaller is
the overspray generated.
Nozzle size
The larger the nozzle size, the more the
material flowing out.
The greater the angle, the wider is the
spray pattern.
2
Safety
2.1
Presentation of Notes
The following notes can appear in this
instruction:
DANGER!
High risk situation that can lead to serious
injuries or death.
WARNING!
Medium risk situation that can lead to
serious injuries or death.
CAUTION!
Low risk situations that can lead to minor
injuries.
Product overview
02/2020
EcoGun 2100 - MSG00004EN
5/52
