6
08 | CHANGING THE SETTINGS
In order to change the pre-settings, switch the slide control (9) to SETUP position and press the menu button (10). A list of the various menu registers appears in the LCD display (8):
•
In order to switch the menu register, press the arrow buttons (14) or (11).
•
To choose a menu point within the menu register, press the arrow buttons (13) o (12).
The chosen menu point is highlighted blue
.
•
Press the OK button (15) to confirm your selection – the active selection is marked with a star (*).
•
If no input is detected, the camera automatically switches off after 3 minutes. In order to enter setup mode again, turn the camera OFF and switch the slide control (9) to SETUP position
again.
09 |
MENU CAM (
CAMERA
)
* Pre-Setting
09.1 CAMERA MODE
Select whether the camera should record a single image (
"Photo"
), a video sequence (
"Video"
) or a combination of picture and video(
"Video"
). Photos are stored in format
.JPG
,
while videos have the format
.MOV
.
07.3 BASIC SETTINGS
CAM
PIR
WKT
SYS
Camera Mode
Photo
Trigger Mode
PIR trigger
Work Time 1, 2, 3, 4
Off
Set Clock
Camera Scene
Auto
PIR Sensitivity
Auto
Language
Format
4:3
PIR Interval
1 Min
Password
Rename
Beep
Overwrite
Format SD Card
Default
Software Version
CAM
CAM
Options
Camera Mode
OK Photo *
OK MENU
Camera Scene
Auto *
Close Object
OK
Moving Object
OK
Still Object
OK
2 Bursts (N+M)
OK
3 Bursts (N)
OK
Chasing Photo
OK
Customize
OK
Photo Size
3 MP *
8 MP, 10 MP, 12 MP, 1.3 MP
OK
Flash Power
High *
Low, Medium
OK
Photo Burst
1 Photo*
1 - 10 Photos
OK
Video
OK MENU
Video Size
1080 P
OK
720 P *
OK
WVGA
OK
Video Length
10 Sec *
5 Sec - 60 Sec
OK
P Video OK MENU