Doro PhoneEasy Display 312C, Руководство пользователя

Страница: 3 / 20

2 www.doro.com
English
www.doro.com 3
Installation
Important!
Please note when programming all references to press = to press once and then immediately
release the button.
The earpiece of the handset may attract small ferromagnetic objects such as staples and pins,
care should be taken when placing the handset near these items.
Connection/Basic setting
1. Connect the curly cord to the handset and to the socket marked
q
on the
side of the telephone.
2.
Connect the mains adapter to the socket marked
DC 9V
on the back of the
telephone and then to an electrical wall socket.
3. The display should flash the word ENGLISH. If not press and hold
v
for
approximately 4 seconds.
4. Select the desired language using
v
/
V
. Press
0
.
5.
Select the desired contrast setting (3=normal) using
v
/
V
. Press
0
.
6.
Set the hour (00-24) using
v
/
V
. Press
0
.
7. Set the minute using
v
/
V
. Press
0
.
8. Set the day using
v
/
V
. Press
0
.
9.
Set the month using
v
/
V
. Press
0
.
10.
Connect the telephone line cord to the socket marked
T
on the back of the
telephone, and then to a network wall socket.
11. Lift the handset and listen for the dial tone.
If you wish to change the clock, language or contrast settings at a later date,
press and hold
v
for approximately 4 seconds and repeat steps 4. - 9. above.
Batteries
Four good quality AA alkaline batteries can be installed to protect the memory
during prolonged power failure. When the batteries are running low will be
displayed.
1.
Disconnect the telephone line cord.
2.
On the underside of the telephone carefully remove the battery cover.
3. Insert the backup batteries ensuring correct battery polarity is observed.
4. Replace the battery cover.
5. Reconnect the telephone line cord.