www.doro.com
Congratulations on your purchase
Doro PhoneEasy® 530X is great for outdoor
use and an active lifestyle thanks to its solid
and splash proof design (IP54). It’s easy to
use and brings you loud, clear sound as well
as access to weather info and e-mail.
1. GET STARTED
SIM card, memory card and battery
1. Remove the battery cover
Be careful not to damage your
fingernails when you
remove the battery
cover. Do not bend or
twist the battery cover
excessively as it may be
damaged.
1
2. Insert the SIM card
(required)
Remove the battery if it is
already installed. Locate
the SIM card holder and
gently slide the card in
the holder.
See the label right next
to the holder for guidance on how to insert
the card. This device accepts mini SIM or 3FF
SIM card.
3. Insert the SD card (optional)
Locate the SD card holder and gently slide
the card in the holder. The device works with
or without a SD card installed. Compatible
card type: microSD, microSDHC.
4. Replace the battery cover
Insert the battery by
sliding it into the battery
compartment with
the contacts facing
downwards to the right.
Replace the battery
cover.
Enter text
• Press a numerical key repeatedly until
the desired character is shown. Wait a
few seconds before entering the next
character.
• Press
*
for a list of special characters.
Select the desired character with
/
and press
OK
to enter it.
• Use
/
to move the cursor within the
text.
• Press
#
to cycle upper case, lower case
and numerals.
• Press and hold
#
to change writing
language.
Predictive text
In some languages you can use the Smart
ABC (eZiType
™
) input method which uses a
dictionary to suggest words.
1.
Press
Menu
â
Settings
â
Messages
â
Predictive text
.
2.
Select
On
to enable, or
Off
to disable.
3.
Press
OK
to confirm.
Speed dial
Use
0
and
2
–
9
to speed dial an entry from
standby.
• Press and hold the corresponding button
to dial.
Add speed dial numbers
1.
Press
Menu
â
Settings
â
Phonebook
â
Speed dial
.
2.
Select
0
â
Add
and select an entry from
the phonebook.
3.
Press
OK
to confirm.
4.
Repeat to add speed dial entries for
buttons
2
–
9
.
SOS calls
As long as the phone is switched on, it is
always possible to place an SOS call by
entering the main local emergency number
for your present location followed by
.
Doro PhoneEasy
®
530X
Quick Start Guide
1. Earpiece
2. Charging socket
3. Headset socket
4. Left selection
button
5. Call button
6. Top 10
7. Voice mail
8. Torch button
9.
*
International
prefix/Symbols
10. Lanyard hold
11.
#
Input method/
Silent
12. Microphone
13. Camera shortcut
14. Message shortcut
15. End call /
Power on/off
16. Arrow buttons
17. Right selection
button
18. Volume control
19. Camera lens
20. Loudspeaker
21. Camera flash/Torch
22. Assistance button
23. Second microphone
Charge the phone
CAUTION
Only use batteries, charger and accessories
that have been approved for use with
this particular model. Connecting other
accessories may be dangerous and may
invalidate the phone’s type approval and
guarantee.
When the battery is running low,
is
displayed and a warning signal is heard.
A
B
• Connect the mains adapter to a wall
socket and to the charging socket
y
(A) or place the device in the cradle (B).
Alternatively connect the cable to the
charging socket
y
on the phone and to
a USB port on a computer.
2. GET TO KNOW YOUR PHONE
Turn the phone on and off
1.
Press and hold the red button
on
the phone to turn it on/off. Confirm with
Yes
to power off.
2.
If the SIM card is valid but protected with a
PIN code (Personal Identification Number),
PIN
is displayed. Enter the PIN code and
press
OK
. Delete with
Clear
.
Note!
If PIN and PUK codes were not
provided with your SIM card, please contact
your service provider.
Tip:
It is recommended to remove the
protective plastic film from the display to
enhance the visibility.
Attempts: #
shows the number of PIN
attempts left. When no more attempts
remain,
PIN blocked
is displayed. The SIM
card must now be unlocked with the PUK
code (Personal Unblocking Key).
1.
Enter the PUK code and confirm with
OK
.
2.
Enter a new PIN code and confirm with
OK
.
3.
Re-enter the new PIN code and confirm
with
OK
.
Start-up wizard
When starting the telephone for the first time,
you can use the start-up wizard to set some
basic settings.
Tip:
You can run the start-up wizard later if
you want.
Step-by-step instructions
The arrow (
â
) indicates next action in step-
by-step instructions. To confirm an action,
press
OK
. To select an item, scroll or highlight
the item using
/
and then press
OK
.
Keypad lock
You can lock the keypad to prevent the keys
being accidentally pressed.
• Press and hold
*
to lock and to unlock
the keypad.
Keylock settings
1.
Press
Menu
â
Settings
â
Security
â
Keypad lock
:
•
Auto keylock
select the time delay for
automatic keypad locking.
•
Unlock mode
select
Single key
to
unlock the keypad with
*
alterna-
tively with
Dual key
to lock and to
unlock with right selection button
(
Name
/
Unlock
) and
*
.
2.
Press
OK
to confirm.
Change language, time and date
The default language is determined by the
SIM card. See
Phone settings
in the complete
manual on how to change language, time and
date.
3. CALLS
Make a call
1.
Enter the phone number including the
area code. Delete with
Clear
.
2.
Press
to dial. Press
Abort
to cancel
the call.
3.
Press
to end the call.
Note!
For international calls, always use
+
before the country code for best operation.
Press
*
twice for the international prefix
+
.
Call from the phonebook
1.
Press
Name
to open the phonebook.
2.
Use
/
to scroll through the
phonebook, or quick search by pressing
the key corresponding to the first letter of
the name.
3.
Press
Options
â
Call,
alternatively, press
to dial the selected entry, or press
Back
to return to standby.
Receive a call
1.
Press
to answer, or press
Silent
to
switch off the ring signal and then
Reject
to reject the call (busy signal).
Alternately, press
to reject the call
directly.
2.
Press
to end the call.
Volume control
Use the side buttons
+/–
or
/
to
adjust the sound volume during a call. The
volume level is indicated on the display.
Silent
Silent is a fixed profile with keypad tone,
message tone and ring tone disabled, while
vibration, tasks and alarm are unchanged.
• Press and hold
#
to activate and to
deactivate silent.
Call options
During a call the selection buttons (
) give
access to additional functions.
Call log
Received, missed, and dialled calls are saved in
a combined call log. 20 calls of each type can be
stored in the log. For multiple calls related to the
same number, only the most recent call is saved.
1.
Press
.
2.
Use
/
to scroll through the call log.
=
Received call
=
Dialled call
=
Missed call
3.
Press
to dial, or
Options
.
4. PHONEBOOK
The Phonebook can store 500 entries with 3
phone numbers in each entry.
Add contact
1.
Press
Menu
â
Phonebook
â
-New contact-
â
Add
.
2.
Enter a
Name
for the contact, see
Enter text. Delete with
Clear
.
3.
Use
/
to select
Mobile
,
Home
or
Office
, and enter the
phone number(s) including the area code.
4.
When done, press
Save
.
ICE (In Case of Emergency)
In the event of a trauma, it is critical to
have this information as early as possible
to increase the chances of survival. Add ICE
contact to improve your own safety. First
responders can access additional information
such as medication and next of kin from your
phone in case of an emergency. All fields are
optional, but the more information provided
the better.
Press
Menu
â
Phonebook
â
ICE
.
5.
Use
/
to scroll the list of entries.
6.
Press
Edit
to add or edit information in
each entry. Delete with
Clear
.
7.
Press
Save
when done.
Settings
• Press
Menu
â
ICE
.
5. ASSISTANCE BUTTON
The assistance button allows easy access to
contact your predefined help numbers should
you need help. Make sure that the assistance
function is activated before use. See the
full manual on how to activate, how to enter
recipients in the numbers list, and how to edit
the text message.
Make an assistance call
1.
When help is needed, press and hold the
assistance button for 3 seconds, or press
it twice within 1 second.
The assistance call begins after a delay of
5 seconds. In this time you can prevent a
possible false alarm by pressing
.
2.
An assistance text message (SMS) is sent
to all recipients.The first recipient in the
list is dialled. If the call is not answered
within 25 seconds, the next number is
dialled. Dialling is repeated 3 times or
until the call is answered, or until
is
pressed.
CAUTION
When an assistance call is activated the
phone is pre-set to handsfree mode. Do
not hold the device near your ear when
the handsfree mode is in use, because the
volume may be extremely loud.
Settings
• Press
Menu
â
Settings
â
Assistance
.
6. MESSAGES
Create and send text messages
1.
Press shortcut button
,
or press
Menu
â
Messages
â
Create new
â
SMS.
2.
Write your message, see Enter text, then
press
To
.
3.
Select a recipient from
Phonebook
.
Alternatively, select
Enter number
to add
recipient manually and press
Done
.
4.
Select
Add
to add more recipients.
You can modify the recipients by selecting
one and press
Options
â
Edit
/
Delete
/
Delete all
.
5.
When done, press
Send
.
English
Note!
All illustrations are for illustrative
purposes only and may not accurately depict
the actual device. The items supplied with your
phone might vary depending on the software
and accessories available in your region or
offered by your service provider. You can
obtain additional accessories from your local
Doro dealer. The supplied accessories provide
the best performance with your phone.
Full user manual
For the full user manual, useful links and
more information please visit
www.doro.co.uk/support/
or contact our
Helpline.
3
2
4
5
6
7
8
16
14
17
15
13
11
12
18
9
22
23
20
19
21
1
10
GB
2
3
4
