PhoneEasy 509 (1011)
QSG
English
Version 1.0
0984
7. CAMERA (TAKE PHOTOS)
1.
Press shortcut button
.
Alternatively press
Menu
â
Camera.
2.
Press
to take the photo.
3.
Press
Options
or press
Back
to take a new
photo (if you do not make any selection
the picture is saved).
Settings
•
Press
Menu
â
Settings
â
Camera
.
For more camera settings, see Camera
settings, in the full manual.
8. BLUETOOTH
®
You can connect wirelesses to other
Bluetooth
®
compatible devices such as
headsets or other phones.
Important!
When you are not using Bluetooth
®
connec-
tivity, turn off
Activate
or
Visibility
. Do not
pair with an unknown device.
Activate Bluetooth
®
1.
Press
Menu
â
Settings
â
Bluetooth
â
Activation
â
On
.
2.
Press
OK
to confirm.
Visibility
1.
Press
Menu
â
Settings
â
Bluetooth
â
Visibility
â
On
.
2.
Press
OK
to confirm.
Search device
1.
Press
Menu
â
Settings
â
Bluetooth
â
Search device
.
2.
Select a device from the list and press
Bond
to connect. If Bluetooth
®
is not
enabled, press
Yes
to activate.
3.
Press
OK
to confirm.
9. SOUND & DISPLAY
Tone setup
1.
Press
Menu
â
Settings
â
Sound
â
Tone
setup
â
Ringtone
.
2.
Use
/
to select one of the available
melodies, the melody will be played.
3.
Press
OK
to confirm or
Back
to discard
changes.
11. SAFETY INSTRUCTIONS
WARNING
The unit and the accessories can contain small parts.
Keep all of the equipment out of the reach of small
children.
The mains adapter is the disconnect device between
the product and mains power. The mains socket outlet
must be close to the equipment and easily accessible.
Network services and costs
Your device is approved for use on the
GSM 900/1800/1900 MHz networks. To use the device, you
need a subscription with a service provider.
Using network services may result in traffic costs. Some
product features require support from the network, and you
may need to subscribe to them.
Operating environment
Follow the rules and laws that apply wherever you are, and
always turn off the unit whenever its use is prohibited or can
cause interference or hazards. Only use the unit in its normal
user position.
This unit complies with guidelines for radiation when it is
used either in a normal position against your ear, or when
it is at least 1.5 cm from your body. If the unit is carried
close to your body in a case, belt holder or other holder,
these holders should not contain any metal, and the product
should be placed at the distance from your body specified
above. Make sure that the distance instructions above are
followed until the transfer is complete.
Parts of the unit are magnetic. The unit can attract metal objects.
Do not keep credit cards or other magnetic media near the unit.
There is a risk that information stored on them can be erased.
Medical units
The use of equipment that transmits radio signals, for example,
mobile phones, can interfere with insufficiently protected
medical equipment. Consult a doctor or the manufacturer of the
equipment to determine if it has adequate protection against
external radio signals, or if you have any questions. If notices
have been put up at health care facilities instructing you to turn
off the unit while you are there, you should comply. Hospitals
and other health care facilities sometimes use equipment that
can be sensitive to external radio signals
Implanted medical devices
To avoid potential interference, manufacturers of implanted
medical devices recommend a minimum separation of
15 cm between a wireless device and the medical device.
Persons who have such devices should:
•
Always keep the wireless device more than 15 cm from the
medical device.
•
Not carry the wireless device in a breast pocket.
•
Hold the wireless device to the ear opposite the medical device.
If you have any reason to suspect that interference is taking
place, turn the phone off immediately. If you have any
questions about using your wireless device with an implanted
medical device, consult your health care provider.
Areas with explosion risk
Always turn off the unit when you are in an area where there
is a risk of explosion. Follow all signs and instructions. There
is a risk of explosion in places that include areas where you
are normally requested to turn off your car engine. In these
areas, sparks can cause explosion or fire which can lead to
personal injury or even death.
Turn off the unit at filling stations, and any other place that
has fuel pumps and auto repair facilities.
Follow the restrictions that apply to the use of radio
equipment near places where fuel is stored and sold,
chemical factories and places where blasting is in progress.
Areas with risk for explosion are often – but not always –
clearly marked. This also applies to below decks on ships;
the transport or storage of chemicals; vehicles that use
liquid fuel (such as propane or butane); areas where the air
contains chemicals or particles, such as grain, dust or metal
powder.
Li-ion battery
This product contains a Li-ion battery. There is a risk of fire
and burns if the battery pack is handled improperly.
WARNING
Danger of explosion if battery is incorrectly replaced. To
reduce risk of fire or burns, do not disassemble, crush,
puncture, short external contacts, expose to temperature
above 60° C (140° F), or dispose of in fire or water.
Recycle or dispose of used batteries according to the local
regulations or reference guide supplied with your product.
Protect your hearing
WARNING
Excessive exposure to loud sounds can
cause hearing damage.
Exposure to loud sounds while driving may
distract your attention and cause an accident.
Listen to a headset at a moderate level, and do not hold
the device near your ear when the loudspeaker is in use.
Emergency calls
Important!
Mobile phones use radio signals, the mobile phone
network, the terrestrial network and user-programmed
functions. This means that connection cannot be
guaranteed in all circumstances. Therefore, never rely
only on a mobile phone for very important calls such as
medical emergencies.
Vehicles
Radio signals can affect electronic systems in motor vehicles
(for example, electronic fuel injection, ABS brakes, automatic
cruise control, air bag systems) that have been incorrectly
installed or are inadequately protected. Contact the manu-
facturer or its representative for more information about your
vehicle or any additional equipment.
Do not keep or transport flammable liquids, gases or
explosives together with the unit or its accessories.
For vehicles equipped with air bags: Remember that air bags
fill with air with considerable force. Do not place objects,
including fixed or portable radio equipment in the area above
the airbag or the area where it might expand. Serious injuries
may be caused if the mobile phone equipment is incorrectly
installed and the airbag fills with air.
It is prohibited to use the unit in flight. Turn off the unit before
you board a plane. Using wireless telecom units inside a
plane can pose risks to air safety and interfere with telecom-
munications. It may also be illegal.
12. CARE AND MAINTENANCE
Your unit is a technically advanced product and should be treated
with the greatest care. Negligence may void the warranty.
•
Protect the unit from moisture. Rain/snowfall, moisture and
all types of liquid can contain substances that corrode the
electronic circuits. If the unit gets wet, you should remove
the battery and allow the unit to dry completely before you
replace it.
•
Do not use or keep the unit in dusty, dirty environments.
The unit’s moving parts and electronic components can be
damaged.
•
Do not keep the unit in warm places. High temperatures
can reduce the lifespan for electronic equipment, damage
batteries and distort or melt certain plastics.
•
Do not keep the unit in cold places. When the unit warms up
to normal temperature, condensation can form on the inside
which can damage the electronic circuits.
•
Do not try to open the unit in any other way than that which is
indicated here.
•
Do not drop the unit. Do not knock or shake it either. If it is
treated roughly the circuits and precision mechanics can be
broken.
•
Do not use strong chemicals to clean the unit.
The advice above applies to the unit, battery, mains adapter
and other accessories. If the phone is not working as it
should, please contact the place of purchase for service.
Don’t forget the receipt or a copy of the invoice.
13. WARRANTY
This product is guaranteed for a period of 12 months from
the date of purchase. In the unlikely event of a fault occurring
during this period, please contact the place of purchase.
Proof of purchase is required for any service or support
needed during the guarantee period.
This guarantee will not apply to a fault caused by an accident
or a similar incident or damage, liquid ingress, negligence,
abnormal usage, non-maintenance or any other circumstances
on the user’s part. Furthermore, this guarantee will not apply
to any fault caused by a thunderstorm or any other voltage
fluctuations. As a matter of precaution, we recommend discon
-
necting the charger during a thunderstorm.
Batteries are consumables and are not included in any
guarantee. This guarantee does not apply if batteries other than
DORO original batteries are used.
14. COPYRIGHT AND OTHER NOTICES
© 2015 Doro AB. All rights reserved.
Bluetooth
®
is a registered trademark of Bluetooth SIG, inc.
eZiType™ is a trademark of Zi Corporation.
vCard is a trademark of the Internet Mail Consortium.
microSD is a trademark of SD Card Association.
The contents of this document are provided “as is”. Except as
required by applicable law, no warranties of any kind, either
express or implied, including, but not limited to, the implied
warranties of merchantability and fitness for a particular
purpose, are made in relation to the accuracy, reliability or
contents of this document. Doro reserves the right to revise
this document or withdraw it at any time without prior notice.
Other product and company names mentioned herein may
be the trademarks of their respective owners.
Any rights not expressly granted herein are reserved. All other
trademarks are property of their respective owners.To the
maximum extent permitted by applicable law, under no circum
-
stances shall Doro or any of its licensors be responsible for any
loss of data or income or any special, incidental, consequential or
indirect damages howsoever caused.
Doro does not provide a warranty for or take any responsi-
bility for the functionality, content, or end-user support of
third-party apps provided with your device. By using an app, you
acknowledge that the app is provided as is. Doro does not make
any representations, provide a warranty, or take any respon-
sibility for the functionality, content, or end-user support of
third-party apps provided with your device.
Content copyright
The unauthorised copying of copyrighted materials is
contrary to the provisions of the Copyright Laws of the United
States and other countries. This device is intended solely for
copying non-copyrighted materials, materials in which you
own the copyright, or materials which you are authorised or
legally permitted to copy. If you are uncertain about your right
to copy any material, please contact your legal advisor.
15. TECHNICAL DATA
Specifications
Network:
GSM 900/1800/1900 MHz
Dimensions:
126 mm x 51 mm x 13 mm
Weight:
94 g (including battery)
Battery:
3.7V/800 mAh Li-ion battery
Operating ambient
temperature:
Min: 0°C (32°F) Max: 40°C (104°F)
Charging ambient
temperature:
Min: 0°C (32°F) Max: 40°C (104°F)
Storage
temperature:
Min: -20°C (-4°F) Max: 60°C
(140°F)
Specific Absorption Rate (SAR)
This device meets applicable international safety require-
ments for exposure to radio waves. The highest SAR value
under the ICNIRP guidelines for use of the device at the ear
is 0.94 W/kg measured over 10 g tissue.
The maximum limit according to ICNIRP is 2.0 W/kg
measured over 10 g tissue.
Declaration of Conformity
Doro hereby declares that
Doro PhoneEasy
®
509
conforms
to the essential requirements and other relevant regulations
contained in the Directives 1999/5/EC (R&TTE) and
2002/95/EC (RoHS). A copy of the Declaration of Conformity
is available at
www.doro.com/dofc
16. FCC
FCC notice
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interfer-
ence received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instrutions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful inter-
ference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and the receiver.
•
Connect the equipment to an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
The FCC can require you to stop using your unit if such inter-
ference cannot be eliminated.
Doro has not approved any changes or modifications to this
device by the user. Any changes or modifications could void
the user’s authority to operate the equipment.
RF exposure information (SAR)
This model phone meets the government’s requirements for
exposure to radio waves. This phone is designed and manu
-
factured not to exceed the emission limits for exposure to
radio frequency (RF) energy set by the Federal Communica-
tions Commission of the U.S. Government.
The exposure standard for wireless mobile phones employs
a unit of measurement known as the Specific Absorption
Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests
for SAR are conducted using standard operating positions
accepted by the FCC with the phone transmitting at its
highest certified power level in all tested frequency bands.
Although the SAR is determined at the highest certified power
level, the actual SAR level of the phone while operating can
be well below the maximum value. This is because the phone
is designed to operate at multiple power levels so as to use
only the poser required to reach the network. In general, the
closer you are to a wireless base station antenna, the lower
the power output.
The highest SAR value for the model phone as reported to
the FCC when tested for use at the ear is X.XX W/kg and
when worn on the body, as described in this user guide, is
X.XX W/kg (Body-worn measurements differ among phone
models, depending upon available enhancements and FCC
requirements.)
While there may be differences between the SAR levels of
various phones and at various positions, they all meet the
government requirement. The FCC has granted an Equipment
Authorization for this model phone with all reported SAR
levels evaluated as in compliance with the FCC RF exposure
guidelines.
SAR information on this model phone is on file with the FCC
and can be found under the Display Grant section of
http://www.
fcc.gov/oet/ea/fccid
after searching on
FCC ID: WS5DORO509
For body worn operation, this phone has been tested and
meets the FCC RF exposure guidelines for use with an
accessory that contains no metal and the positions the
handset a minimum of 5/8 inch (1.5 cm) from the body. Use
of other enhancements may not ensure compliance with
FCC RF exposure guidelines. If you do not use a body-worn
accessory and are not holding the phone at the ear, position
the handset a minimum of 5/8 inch (1.5 cm) from your body
when the phone is switched on.
*In the United States, the SAR limit for mobile phones used
by the public is 1.6 watts/kilogram (W/kg) averaged over
one gram of tissue. The standard incorporates a substantial
margin of safety to give additional protection for the public
and to account for any variations in measurements. SAR
values may vary depending on national reporting require-
ments and the network band.
Text size
You can customise the text size for the menu
and messages.
1.
Press
Menu
â
Settings
â
Display
â
Text
size
:
•
Normal
/
Large
2.
Press
OK
to confirm.
Brightness
You can customise the brightness settings.
The higher value, the better contrast.
1.
Press
Menu
â
Settings
â
Display
â
Brightness
:
•
Level 1-3
.
2.
Press
OK
to confirm.
10. ADDITIONAL FUNCTIONS
Alarm
1.
Press
Menu
â
Alarm
â
On
.
2.
Enter the alarm time using the keypad and
press
OK
to confirm.
•
For a single occurrence, select
Single
.
•
For a repeated alarm, select
Repeated
.
Scroll through the list of days and
press
On/Off
to enable/disable the
alarm for each day.
3.
When done, press
Save
.
4.
When the alarm goes off a signal will
sound. Press
Stop
to turn off the alarm or
press
Snooze
to repeat the alarm after 9
minutes.
Note!
The alarm will work even when the
phone is switched off. Do not press
Yes
to
power on if wireless phone use is prohibited
or when it may cause interference or danger.
Torch
1.
Press
Menu
â
Torch
.
2.
Select
Off
to turn off.
Tip:
Press and hold shortcut button
to
turn on the torch. Release to turn off.
www.doro.com