5
ON/OFF BUTTON
The On/Off button is used to switch the handset on or off. When the handset is
switched off, battery power is conserved and calls cannot be made or received.
To switch off, press & hold the button until the handset beeps, then release.
To switch on, press & hold the button until the handset beeps, then release.
BELT CLIP
A belt clip is provided with the product. This item can be connected easily to the rear
of the handset by fitting it to the small rectangular holes on the sides.
RANGE WARNING
If you are on a call and accidentally walk out of range of the base unit, the sound quality
in the earpiece will de-grade and warning beeps will be heard.
IN-USE TIME
When the battery is fully charged will the in-use time be 11 hour standby or 13 hours
talk time. The times are approximately and it assume normally temperature, the battery
is correct and fully charged
HEADSET SOCKET
A headset can be attached to the headset socket on the left hand side. When a headset
is connected, sound will not be audible through the handset microphone.
Compatible headsets can be ordered via the Consumer Support department on
01527 583800.