EN 2
English
To delete a memory
1.
Press
v
/
V
to select the required memory location.
2.
Press
DELETE
.
3.
DELETE?
will be displayed.
4.
Press
DELETE
to erase the selected memory position.
5.
Press
PROGRAM
to exit.
To delete all memories press
v
/
V
then press and hold
DELETE
until
DELETE ALL?
is displayed. Press
DELETE
again to delete all memories.
Transfer to telephone (Congress 150)
1.
Disconnect the telephone line cord from the network wall socket.
2.
Connect the supplied cable to the programmers
UP LOAD
socket and to the
socket marked
PROG
on the telephone.
3.
Ensure the
P
/
N
/
PROG
switch is set to
PROG
.
4. CONNECTED
will be displayed.
5.
Press
UPLOAD
to transfer stored numbers to the telephone.
6.
UPLOADING
will be displayed followed by either
OK
if successful or
ERROR!
.
7.
Disconnect the supplied cable and reset the
P
/
N
/
PROG
switch from
PROG
to
N
.
Repeat steps 1-7 on all telephones requiring programming.
Pulse/Tone dialling
If you have selected pulse dialling and you wish to switch to tone dialling during the
dialling sequence press
*/
P
T
.
Programming equipment
A telephone can be connected to the
UP LOAD
socket for easy programming of One-
Touch-Memories.
The
P
/
N
/
PROG
switch on the underside of the telephone (Congress 150) must be set to
PROG
.
Содержание congress Programmer
