Doro 640, Руководство пользователя

Страница: 14 / 20

English
Use of answer machine (base unit)
The base unit display always shows the total number of messages in
the memory, i.e. both old and new.
The number in the base units’ display will flash when there are new messages.
Playback always starts with new messages.
1. Press
9
(base unit) to begin playback of all messages.
2.
The following functions are available during playback:
Command Function
8 8
...................... Repeat/skip backwards.
9 9
...................... Skip to next message.
■
......................... Stop playback.
x
.......................... Delete current message.
VOL + / -
............ Increase or decrease the volume.
3.
Delete old messages to avoid reduction in memory capacity. Other messages will be saved.
Delete all old messages
This can only be done after playback. Press
x
and then press
x
.
Use of answer machine (handset)
The symbol is shown at the bottom of the display when there are new messages.
Playback always starts with new messages.
1.
Press
Menu
. Scroll to
TAM
. Press
OK
.
2.
Scroll to
Play Messages
. Press
OK
.
3. Finish by pressing
L
.
Command Function
2 .......................... Playback of messages/Stop.
4 (|
8
) .................. Repeat/skip to previous message.
5 .......................... Erase single message during playback.
6 (
9
|) .................. Skip to next message.
......................... Switch between handset/speaker.
/ ☼
................... Volume control.
Delete all old messages
1. Press Menu . Scroll to TAM . Press OK .
2. Scroll to Delete All Mess . Press OK .
3.
Confirm by pressing
Del
.