Doro 620, Руководство пользователя

Страница: 8 / 55

English
Base settings
System PIN is 0000 on delivery.
1.
Press
w
. Scroll to
Setup BS
. Press
0
.
2.
Scroll to desired function e.g.
Access Code
. Press
0
.
3.
Enter the required setting. Press
0
.
Change PIN
You can change the PIN code (0000 on delivery).
Dial Mode The dial mode setting should be Tone.
Flash Time
Only for adaptation to international company switchboards.
The normal setting is 100 ms. (600 ms in New Zealand).
Access Code Enter the digit that obtains an external line and the telephone will
insert a pause automatically when a number starts with that digit.
Set back
Resetting the base unit.
Expanded system (+1)
The following functions only apply to +1 systems. It is NOT possible to add additional
handsets at a later time. The base unit should be centrally positioned so that the area covered
is roughly equal for both handsets.
INT calls
1.
Press
w
. Scroll to
Call intern
. Press
0
.
2. Enter the allocated number of the handset that you wish to call,
1
-
4
A tone will be heard if an external call comes in while an internal call is in progress. You must
then terminate the internal call by pressing
q
, in order to be able to receive the external call
by pressing
q
.
Transferring calls/Conference between handsets
1.
While an external call is connected on line.
2. Initiate an internal call as described above.
3. Press
q
to transfer the call OR press
w
, scroll to Conference and then press
0
.