851-712 Rev. C
11
Dorner Mfg. Corp.
Ready-To-Run Mini Conveyors
Installation
4. Tighten three screws
(Figure 16, item 1)
, to 80 in-lb (9
Nm).
Figure 16
Figure 16
Variable Speed Controller
Variable Speed Controller Mounting to
Conveyor
Figure 17
Typical Variable Speed Mounting on Conveyor
Figure 17
Illustration References:
Figure 18
Shipping Package
Figure 18
1. Assemble mounting clips
(Figure 19, item 1)
with
screws
(Figure 19, item 2)
to the top of the controller.
Figure 19
Figure 19
A
WARNING
Failure to secure three screws (Figure
16, item 1), may cause conveyor sections to
drop down, causing severe injury.
TIGHTEN SCREWS AFTER ADJUSTMENT.
1
Item Part
Number
Description
1
920406M
Socket Head Screw, M4-0.70 x 6 mm
2
202658
Mounting Clip (x2)
3
920612M
Socket Head Screw,
M6-1.00 x 12 mm (x2)
4
639971M
T-Bar, Single Drop-In (x2)
5
827-101
Controller
827-100
Reversing Controller
A
WARNING
Exposed moving parts can cause severe
injury.
LOCK OUT POWER before removing guards
or performing maintenance.
3
5
1
2
4
1
2
