Dorner AquaPruf 7400 Ultimate CE Series, Инструкция по установке, эксплуатации и запасным частям

Страница: 15 / 46

851-638 Rev. E 15 Dorner Mfg. Corp.
7400 Series CE End Drive Conveyors
Installation
Belt Installation
Typical Belt Components (Figure 36)
Figure 36
1. Position the belt on the conveyor frame (Figure 37) .
Figure 37
2. Wrap the belt around the conveyor, making sure the
sprocket teeth have engaged the belt.
3. Bring the ends of the belt together (Figure 38) .
Figure 38
4. Insert the belt rod (Figure 39, item 1) .
Figure 39
5. Push the belt rod in as far as possible.
6. Lightly tap the head of the rod with a hammer until it
snaps into position.
7. Extend the tension end to remove excess slack in the
belt
(Figure 40) .
Figure 40
8. Insert the pull pins (Figure 41, item 1) on the tension
end of the conveyor.
Figure 41
1 Chain belt
2 Belt rod
1
2
1
2
1
1